Introduction:

Access power suitable for building intercom, access control various entrances and exits, especially for all kinds of electric locks. Access power can reduce the load of access controller, save wiring works to reduce the failure risk. Set NO / NC output, can control all types of electric locks. Set delay control circuit, lock time (0-15) seconds, set open button input, can directly open the electric lock.

Connection Description:

1. Back-up battery access lines, red for positive, black is negative. (Access power without this feature)

2. DC12V output.

3. GMD negative.

4. PUSH open button inputs, which can be accessed switch output (relay output) control the electric lock access controller.

5. NO terminal and GND terminal, no normal output, after the key trigger output DC12V, 3Amps +, NO is positive, GND is negative.

6. GND is negative. NO / NC shared lines.

7. NC terminal and GND terminal, normal output DC12V, 3Amps +. After the button is triggered off, NC is positive, GND is negative.

8. + PUSH: Input 12V unlock (positive lock)

9. Adjustable electric locking knob delay 0-15 seconds.

Technical parameters:

1. Dimensions: 901 type (180 × 78 × 65) mm

   AC Input: AC200 / 230V 50Hz

   DC Output: DC12V 3A

   Function: NO long pass, NC long closed, adjustable delay with the signal line (delay of 0-15 seconds), with positive and negative signals triggering

Technical parameters:

1. Dimensions: 903 type (200 × 160 × 75) mm

2. AC Input: AC200 / 230V 50Hz

   DC Output: DC12V 5A

   Function: NO long pass, NC long closed, adjustable delay with the signal line (delay of 0-15 seconds), with positive and negative signals triggering

   UPS interface: Supports 12V 7.2Ah battery interface

Standard accessories:
Access the power of a
A certificate
Warranty card
A manual
Packaging shell a